This post was most recently updated on March 21st, 2022
10 Best 2500 Watt Amp 2022 – Reviews & Guide
Good power is a big factor in the sound quality of your audio system. A good amp will do the trick, but if you’re going to spend a lot of money on a system, it’s worth looking at the amp that’s powering the speakers. And while some amps are designed to handle multiple amplifier channels, others are designed for each channel to be played through one amp.
For example, if you’re playing through a single pair of speakers, you can get away with smaller amps and save money. But if you’re playing through more than one pair of speakers, you’ll want to invest in an amp that delivers power to all channels (and not just two or three).
What size battery do I need for a 2000 or Above watt amp?
Yes, a 2000 watt amp will run on a 1000 watt battery. However, it is not recommended to run your amp at full power for long periods of time. The reason for this is the fact that 1000 watts is already pushing it for your battery and you do not want to go over the limit and drain your battery too much otherwise it can be damaged.
The best thing to do is invest in a good deep cycle battery with a high reserve capacity this will ensure that your amp doesn’t run out of juice while running at full power.
The PV 5-Channel Amplifier from BOSS Audio Systems is built with a MOSFET power supply to kick out up to 3700 Watts of power. This 5-channel amp can run your whole system without having to bridge or use multiple amplifiers. The full-range class A/B topology offers low distortion and clarity with a frequency response of 20Hz to 20kHz. Customize the sound with Variable Low Pass Crossover and Bass Boost. Bridge channels for more power and flexibility.
The PV 3700 is compatible with Audio Output of Smartphones and MP3 Players, as well as all factory installed & aftermarket source units. Hook these up to the RCA inputs on the amp and you have an easy way to play your music library. The Remote Subwoofer Control lets you adjust the bass from where you are sitting in the car, even in the back seat!
BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
- Item Dimensions LxWxH : 19 x 5.63 x 2.19 inches
- Manufacturer : CT Sounds
- Brand : CT Sounds
The CT Sounds ct-700.1d monoblock amplifier is a very powerful, super compact amplifier that is perfect for any vehicle or car audio application. The small footprint and compact chassis make this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 700 watt amplifier absolutely pounds. Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
The CT Sounds ct-700.1d monoblock amplifier features a MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier runs cool for even the most demanding playlists. 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected.
Car audio amplifier with 700 watts RMS power at 1-ohm load (14.4v); 380 watts RMS at 2-ohm load (14.4v); 200 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included).
A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry. They operate much faster than bipolar transistors, they have lower gate drive power requirements, & they exhibit lower input capacitance.
A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
The PRIME Series AR1500M monoblock, class A/B amplifier features a MOSFET power supply, and 1500 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control.
The built-in, variable low pass crossover is adjustable from 50 Hz – 250 Hz. When a subwoofer is added to a system, it takes over the reproduction of all bass notes and frequencies below approximately 80 Hz. This frees up your full range speakers to reproduce all notes above that level.
With an array of input connections, you can use this versatile amp with any in-dash stereo or factory radio. Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
This Class A/B amplifier features a MOSFET power supply that makes it powerful enough to run your subwoofer or speakers. It can also be bridged for use with smaller speakers.
The Rockford Fosgate Prime R2-500X4 is a 500 Watt 4-channel amplifier with high level inputs, which makes it perfect for upgrading factory systems. The R2-500X4 is a full-range class D 4-channel amplifier with on-board Punch EQ that features a remote bass control knob. It can be used to power front and rear speakers or even subwoofers. The R2 amplifiers come with the Rockford Fosgate signature black chrome finish, the iconic badge and aluminum heat sink.
The Prime R2 amplifier series from Rockford Fosgate offers a compact car audio solution designed to deliver big sound and performance in an affordable package. Available in 2-, 3-, 4-, 5- and 6-channel configurations these amplifiers are rated from 125 Watts up to 500 Watts of power output into 2 Ohms.
Most vehicles have factory radio systems that lack good quality output for adding aftermarket amplification. These factory systems are usually called “high level” or “speaker level”. The Prime R2 amplifiers feature both speaker level inputs as well as low level (RCA) inputs. This allows you to add an amplifier to almost any vehicle without having to run new wires from the receiver to the amp.
The Rockford Fosgate PBR300X4 is a full-range 4-channel amplifier for your car audio system. This compact amplifier can be mounted easily and performs well even when space is limited. It delivers 300 Watts of power, which means it can support an entire car audio system on its own. The Class BR topology provides excellent efficiency while maintaining an ample reserve of current capacity.
Supporting up to 75W RMS per channel at 4 Ohms, the PBR300X4 amplifier is perfect for under-seat installations and other space-challenged locations. The variety of high- and low-level inputs make it compatible with nearly any in-dash head unit or source unit, including the factory radio. The variable DC offset turn-on control allows you to activate the amplifier without any pops or clicks from your speakers.
Rockford Fosgate’s patented Boosted Rail technology significantly reduces current draw from your electrical system so that you can enjoy more power without a demand on your vehicle’s battery and alternator. The 12dB/octave Butterworth crossover features selectable high-pass frequency and slope settings.
The PRIME R1200-1D is an ultra-efficient mono amplifier producing 1,200 Watts into a 1-Ohm load. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers. The on-board Punch EQ with +18dB boost helps to deliver the bass that you need and the on-board adjustable low-pass crossover and infrasonic filter allow you to tune your system to perfection.
The R1200-1D amplifier is great with subwoofers wired in parallel or series, has quality connections, accepts up to 4 gauge power/ground wiring and includes a remote bass level control (Punch Level Control).
Rockford Fosgate systems are developed by passionate audio fanatics for real world use. Since day one our philosophy remains consistent: “To do it right.” That means no cutting corners or using gimmicks. It means using superior parts, design and engineering for consistently superior performance.
When Rockford makes a mono amp we make sure it’s designed from the ground up to produce big bass. The PRIME R1200-1D is an ultra.
If you’re ready to step up to better car audio, the Pioneer GM-A3702 2-channel amplifier has what it takes. It’s got an impressive feature set and a sleek look that matches other Pioneer gear, so you’ll get great sound and killer looks in one package.
This versatile amp pumps out up to 500 watts total, so you can drive your speakers or subwoofers with plenty of clean power. You can also bridge this amp for more power, so it’ll work well with a variety of systems.
Speaker-level inputs make it easy to add this amp to any factory or aftermarket stereo. And if you’re using an aftermarket receiver, the preamp inputs will come in handy.
It’s time to step up your game. The Pioneer GM-A3702 is a 500 watt 2-channel bridgeable amplifier that’s a great way to upgrade the power in your car.
The Class AB bridgeable design of this amp delivers crisp, clean sound from your subwoofer or speakers. The automatic signal sensing and turn-on let you play music without having to worry about flipping switches.
You can also use its Hi-Volt input level control to make sure your music doesn’t clip when you’re playing it loud, so you’ll get distortion-free sound no matter what volume you’re playing at.
The GM-A3702 is a high performance 2-channel amplifier that is rated at 500 Watts Max Power (2 x 250 Watts) and incorporates many of the features and technologies developed for Pioneer’s line of Elite Class D amplifiers. It is designed to be used as a full range Class AB amplifier, or can be configured to operate in bridged mode to power a single subwoofer. The GM-A3702’s small footprint allows it to easily fit into tight spaces, while its high-efficiency design keeps current draw low and reduces operating temperatures.
- Item Dimensions LxWxH : 9.5 x 10 x 2.4 inches
- Manufacturer : Planet Audio
- Mounting Type : Floor Standing
- Brand : Planet Audio
- Number of Channels : 2
Planet Audio AC1000.2 2 Channel Car Amplifier – 1000 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
The Planet Audio AC1000.2 Anarchy Series Class A/B 2-Channel Amplifier can pump up the jam. It is capable of running your entire system with 1,000 Watts of MAX power.
This 2-Ohm stable Amplifier features a MOSFET power supply, making it powerful and efficient. Customize the sound with Variable Low Pass Crossover and Bass Boost. Look like a pro with the Stealth top mounted control panel. Bridge channels for more power and flexibility.
The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud.